Construction 10/30 Hour Topics
- Confined Spaces in Construction - Background; categories of confined spaces; welding, cutting, and heating in confined spaces; ventilation, control factors, combination hazards, hazardous atmospheres, physical hazards, retrieval systems, communications, rescue, respirators, and testing.
- OSH Act and History - OSHA’s purpose, origin of standards, coverage, duties, advisory committees, inspections, investigations, recordkeeping, citations, enforcement, 1926 subparts, and statistics.
- OSHA Inspections, Citations, Multi Employer Worksites, and Focused Inspections -What to expect during and after an OSHA inspection, types of violations, consultation assistance, and the OSHA emergency hotline.
- Subpart C Safety and Health Provisions - Contractor requirements, accident prevention, machinery and tools, training and experience, education, fire protection, housekeeping, illumination, sanitation, PPE, access to medical records, emergency plans, safety program elements, management commitment and leadership, and worksite analysis.
- Subpart D Occupational Health and Environmental Controls - Medical services; sanitation; noise exposure; ionizing and non-ionizing radiation; gases, vapors, fumes, dusts, and mists; illumination; ventilation; hazard communication; written program; labeling; MSDS; and training.
- Subpart F Fire Protection and Ladders Prevention- Flash point, flammable limits, types of fires and fire extinguishers, PASS method, flammable and combustible liquids, and dispensing flammable liquids.
- Subpart J Welding - Hazard statistics, health hazards, protective clothing and equipment, torches, arc welding, fire prevention, ventilation, and the proper use and care of gas cylinders
- Subpart K Electrical - Requirements, hazards, wiring design and protection, grounding, hazardous locations, and safety related work practices.
- Subpart L: Scaffolds - Scaffold platform construction, types of scaffolding, hazards, capacity, access, use, fall protection, aerial lifts, training, and inspection.
- Subpart M: Fall Protection - Fall protection systems, leading edge work, hoist areas, holes and skylights, ramps, runways, walkways, excavations, dangerous equipment, overhand bricklaying, roofs, safety monitoring system, anchorage, lifelines, deceleration devices, warning devices, safety monitors, and fall protection plans.
- Subpart N: Cranes - Major causes of crane accidents, who is at risk, parts of a crane, types of cranes, pre-use planning, load capacity, hand signals, suspended loads, supporting surface, rigging equipment slings, and inspections.
- Subpart P: Excavations - Hazards, protection of employees, design of protective systems, inadequate protective systems, shoring, trench shields, hydraulic trench supports, materials and equipment, protection from vehicles, hazardous conditions, access and egress, inspections, and soil classification.
- Subpart Q Concrete and Masonry Construction - Background, post-tensioning operations, general requirements, working under loads, bulk cement storage, concrete pumping systems, power concrete trowels, bull floats, lockout/tagout, shoring and re-shoring, vertical slip forms, lift slab operations, and limited access zones.
- Subpart T Demolition - Preparatory operations, hazards, stairs, passageways, chutes, removal of walls, masonry sections and chimneys, floors, storage, and blasting explosives.
- Subpart X Stairways and Ladders - Hazards, stairways, handrails, stairrails, stairs, temporary stairways, platforms and swing doors, ladders, and proper ladder use.
ProWebsite provided by newline Creations
